2.0mm Box header connector SMT patch

2.0mm Box header connector SMT patch The Box Header Connector is a simple horn connector. The Box Header Connector is a square plastic socket with square pins arranged neatly. The Box Header Connector differs from the horn connector in that the simple horn removes the buckle on both sides. According to requirements, the outer dimensions of Box Header Connector are 1.27 pitch, 2.0 pitch and 2.54 pitch. Depending on the spacing, the diameter of the square row of pins used changes accordingly. The bottom contact surface with PCB board can be designed as SMT patch type or DIP straight insert 180 degrees. Function: After the Box Header Connector is welded to the PCB board, it connects the IDC cable of the corresponding specification, and then forms the circuit connection mode required by the designer with another circuit. Usually used to transmit control signals and weak currents. [Product name] : Box Header Connector / Rejectoinal Connector [Pitch] :1.0/1…

Ejector Connector SATA 15P Connector Rejectoinal Connector Round Male Pin Header Connectors Round Female Pin Header Connectors