ASTM A179 Embedded Fin Tube with Aluminum Fin Overview: G type embedded spiral finned tube is processed from a certain width in the steel pipe and spiral groove depth, then inlays the ribbon on the steel pipe by the equipment. In winding process, as the pre-tightening force to a certain extent so the strip will be firmly in the spiral groove, to ensure there is a certain contact area between steel band and steel pipe. In order to prevent the strip spring falling off the light tube, the two ends of the steel strip need to weld onto the steel pipe. In order to set easily, there should be a certain clearance between steel belt and spiral groove. If the clearance is too small the setting process will be difficult to proceed smoothly. In addition, the steel belt of winding there will always be a certain amount of rebound, which makes it cannot very good joint among the steel belt and spiral groove bottom. Inlaid fins can be conducted on general equipment, an…

Similar

ASME SB111 C68700 Aluminium Brass U Bend Tube
Copper Alloy Steel Tube Bundles For Heat Exchanger
ASTM A312 TP347 HFW Serrated Fin Tubes
ASTM A269 Bright Annealed Stainless Steel Tube
ASTM A355 Gr.P9 Alloy Steel Serrated Fin Tubes
ASTM A335 P11 P9 Alloy Steel Studded FinTube
ASME SA106 GR.B High Frequency Welded/HFW Fin Tube
ASME SA106 GR.B High Frequency Welded Fin Tube
ASTM A335/ASME SA335 P22/UNS K21590 Alloy Steel Pipe
ASTM B111/ASME SB111 C70600 Copper-Nickel Alloy Tube
ASTM B111/ASME SB111 C68700 Aluminum Brass Tube
ASTM B407 Incoloy 800H Nickel Alloy Seamless Tube

YUHONG HOLDING GROUP CO.,LIMITED---ZHEJIANG YUHONGWELLSTEEL CO,. LTD

YUHONG HOLDING GROUP is one of the largest Procurement, Engineering & Contracting Grou…

Copyrights © 2024 aevictoryparts.com All Rights.Reserved .