cotton nonwoven embroidery backing paper interlining

When embroidering, tighten the hot-melt adhesive paper at the bottom. The hemp surface of the hot-melt adhesive paper is attached to the material to be embroidered to avoid its movement and crepe. The hot-melt adhesive paper on the four sides of the embroidery stretcher is clamped with long clips. In order to save costs, generally 3-4cm can be used. When collecting the embroidered material after embroidery, it is necessary to consider whether the material to be embroidered is durable, so as to avoid being pulled out of shape or having holes or making pinholes larger, which will affect the quality. Otherwise, use scissors to cut the material to be embroidered on the hot melt adhesive paper, such as sweater embroidery, loose fabric embroidery, etc., which need to be cut off. Embroidery backing stabilizer (tearway / cutway small roll ) 1) material : polyester /viscose 2) Weight: 50gsm, 75gsm, 90gsm, 105gsm 3) normally. width: 10" x 25yard,…

Embroidery Stabilizer Activated Carbon Filter Nonwoven Face Mask Activated Carbon Nonwoven Single Dot Fusible Interlining Warp Knit Interlining