WP-27 Water Cooled TIG Torches

WP-27 Water Cooled TIG Torches The torch disassembles into several parts. The small tungsten rod (several sizes are available) is the electrode. This electrode does not burn up like a filler rod. The tungsten can be sharpened to a point or ball shape depending on what you are welding. A copper collet holds the tungsten and is used to adjust the length that the tungsten protrudes from the cup. The ceramic cup (usually pink) can be unscrewed and replaced as needed. Several cup outlet diameters are available. In the collet body, there are several cross-holes that allow the gas to pass into the cup and surround the tungsten. This excludes oxygen that would contaminate a weld. Loosening the back cap will reduce the collet's grip on the tungsten and allow the tungsten to be removed for sharpening or replacement. Technical Data Rating: 500A DC Duty cycle: 100% Electrodes: 1.0-6.4mm Changzhou EDAWELD Trading Co.,LTD was established based on…

Contact Tips Water Cooled Tig Welding Torch Air Cooled Tig Welding Torch