The condition of the compensating oil pump The compensation pump is the heart of the whole oil circuit system of the film compressor, and its role is to continuously transport the hydraulic oil needed to form oil pressure. If it fails, it will paralyze the entire oil system. The main faults are: 1); Compensation pump plunger stuck Compensation pump is a plunger pump, the gap between the plunger rod and the sleeve is very small, if the hydraulic oil is used for a long time or the filter is damaged, the dirt in the hydraulic oil will enter the pump body, causing the plunger to jam. At this time, the compensation oil pump should be cleaned to ensure that the plunger can move freely. 2); Compensation oil pump screen blockage Cleaning screen 3); The ball of the oil inlet and discharge valve is stuck or the seal is damaged Clean the inlet and discharge valves, ensure that the steel ball can move freely and carry out the kerosene leakage test, and there should be no leakage within one minute.…

Similar

The cylinder block's key parts
The advantages of diaphragm compressors
The working principle of a diaphragm compressor
The material selection of a flywheel
The sealing performance of cylinder head is crucial
Efficient and precise diaphragm compressor
A commonly used type of compressor
Widely used air compressors
The performance characteristics of diaphragm compressors
Safe and reliable diaphragm compressor
High efficiency oxygen compressor
Chemical gas compressors for chemical industry

Permanent Machinery Co., Ltd.

Companies adhering to the'One hundred years of enterprise,milltary qualty,"the enterprise will be bu…

Copyrights © 2024 aevictoryparts.com All Rights.Reserved .